tC L4-2.4L (2AZ-FE) (2005)
/Page-210002.png)
d. Loosen the camber adjusting cam assembly set nut.
e. Loosen the tie rod adjusting tube set nuts.
f.
Adjust the camber and toe-in by turning the adjusting cam and adjusting tube.
HINT: Adjust the camber and toe-in to the center of the specified ranges as much as possible.
Toe-in
Camber
g. Tighten the camber adjusting cam assembly set nut.
Torque: 74 Nm (755 kgf-cm, 55 ft. lbs.)
h. Tighten the tie rod adjusting tube set nut.
Torque: 56 Nm (571 kgf-cm, 41 ft. lbs.)
