tC L4-2.4L (2AZ-FE) (2005)
Drive Belt: Service and Repair
FAN AND GENERATOR V-BELT (2AZ-FE)
REPLACEMENT
1. REMOVE FRONT FENDER APRON SEAL RH
2. REMOVE FAN AND GENERATOR V-BELT
a. Using SST, loosen the V-ribbed belt tensioner arm clockwise, then remove the fan and generator V-belt.
SST 09249-63010
NOTICE:
-
Be sure to connect SST and the tools so that they are inline when using.
-
When retracting the tensioner, turn it clockwise slowly in 3 second or more.
-
Be sure to not apply force rapidly.
-
After the tensioner is retracted all the way, do not apply force any more than necessary.
3. INSTALL FAN AND GENERATOR V-BELT
a. Using SST, loosen the V-ribbed belt tensioner arm clockwise, then install the fan and generator V-belt.
SST 09249-63010
NOTICE:
-
Be sure to connect SST and the tools so that they are inline when using.
-
When retracting the tensioner, turn it clockwise slowly in 3 second or more.
-
Be sure to not apply force rapidly.
-
After the tensioner is retracted all the way, do not apply force any more than necessary.
4. INSTALL FRONT FENDER APRON SEAL RH