tC L4-2.4L (2AZ-FE) (2005)
16. REMOVE FUEL TUBE SUB-ASSEMBLY
a. Remove the fuel pipe clamp No. 1.
b. Pinch the retainer as illustrated, then pull the fuel tube connector out of the pipe.
NOTE:
-
Remove any dirt and foreign objects on the fuel tube connector before performing this work.
-
Do not allow any scratches or foreign objects on the parts when disconnecting, as the fuel tube connector has the O-ring that the seals the
pipe.
-
Perform this work by hand. Do not use any tools.
-
Do not forcibly bend, twist or turn the nylon tube.
-
Protect the disconnected part by covering it with a vinyl bag after disconnecting the fuel tube.
-
If the fuel tube connector and pipe are stuck, push and pull to release them.
17. DISCONNECT HEATER WATER INLET HOSE A
a. Remove the hose clamp.
b. Remove the heater water inlet hose from the heater radiator unit and cylinder head.