tC L4-2.4L (2AZ-FE) (2005)
c. Install the fuel delivery pipe together with the 4 fuel injectors, then temporarily tighten the 2 bolts.
NOTE: Do not drop the 4 fuel injectors when installing the fuel delivery pipe.
d. Check that the fuel injector rotate smoothly.
If the fuel injector does not rotate, replace the O-ring.
e. Retighten the 2 bolts to specified torque.
Torque: 20 N.m (205 kgf.cm, 15 ft.lbf)
f.
Connect the 4 fuel injector connectors.
g. Install the 2 wire harness clamps.
h. Connect the ventilation hose No. 2 to the ventilation valve.
NOTE: Make sure that the paint mark and hose clamp are at the correct angle when installing.