tC L4-2.4L (2AZ-FE) (2005)
-
Power window control system
-
Sliding roof system
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE RR SEAT CUSHION ASSEMBLY
3. REMOVE REAR FLOOR SERVICE HOLE COVER
4. REMOVE FUEL SUCTION W/ PUMP & GAUGE TUBE ASSEMBLY
5. DRAIN FUEL
6. REMOVE FLOOR PANEL BRACE FRONT
7. REMOVE EXHAUST PIPE ASSEMBLY CENTER
a. Remove the 4 bolts and 2 compression springs.
b. Remove the exhaust pipe center from the 2 exhaust pipe supports No. 4.
c. Remove the gasket from the exhaust pipe front.
d. Remove the gasket from the exhaust pipe center.