tC L4-2.4L (2AZ-FE) (2005)
tube breather tube to the pipe.
NOTE:
- Check that there are no scratches or foreign objects around the connected part of the fuel tube connector and pipe before performing this
work.
- After connecting the fuel tube connector, check that the fuel tube connector and pipe are securely connected by pulling them.
g. Connect the fuel tank main tube.
1. Align the fuel tube connector with the pipe, then push the fuel tube connector until the it comes into contact with the seat to connect the
fuel tank main tube to the pipe, then push the retainer up until the claws lock.
NOTE:
- Check that there are no scratches or foreign objects around the connected part of the fuel tube connector and pipe before performing this
work.
- After connecting the fuel tank main tube, check that the fuel tank main tube is securely connected by pulling the fuel tube connector and
pipe.
28. INSTALL REAR SUSPENSION BRACE LOWER RH
a. Install the rear suspension brace lower.
Torque: 63.5 N.m (645 kgf.cm, 47 ft.lbf)
29. INSTALL REAR SUSPENSION BRACE LOWER LH
a. Install the rear suspension brace lower with 3 bolts.
Torque: 63.5 N.m (645 kgf.cm, 47 ft.lbf)
30. INSTALL CHARCOAL CANISTER ASSEMBLY