tC L4-2.4L (2AZ-FE) (2005)
/Page-630007.png)
c. Fit the fuel tube into the clamp.
d. Install the wire harness clamp.
e. Connect the throttle control motor connector.
f.
Connect the throttle body hose No. 1 to the throttle body.
g. Connect the water by-pass hose No. 2 to the throttle body.
NOTE: Make sure that the paint mark and hose clamp are at the correct angle when installing.
h. Connect the water by-pass hose to the throttle body.
NOTE: Make sure that the paint mark and hose clamp are at the correct angle when installing.
7. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
