tC L4-2.4L (2AZ-FE) (2005)
b. Install the hose clamp.
NOTE: Make sure that the paint mark and hose clamp are at the correct angle when installing.
27. INSTALL FUEL TUBE SUB-ASSEMBLY
a. Align the fuel tube connector with the pipe, then push the fuel tube connector until the retainer makes a "click" sound to connect the fuel tube
to the pipe.
NOTE:
-
Check that there are no scratching or foreign objects around the connected part of the fuel tube connector and pipe before performing this
work.
-
After connecting the fuel tube connector, check that the fuel tube connector and pipe are securely connected by pulling them.
28. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY
29. INSTALL THROTTLE BODY ASSEMBLY
30. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
31. INSTALL COWL BODY MOUNTING BRACKET LOWER LH
a. Install the cowl body mounting bracket lower with the bolt and clip.
Torque: 13 N.m (135 kgf.cm, 10 in.lbf)