tC L4-2.4L (2AZ-FE) (2005)
Required SSTs
VIN Write Procedure
To write a VIN to a replacement ECM (PCM), use the following process:
1.
Confirm the VIN. It is located on the front left of the instrument panel.
2.
Connect the Diagnostic Tester to DLC3.
3.
Turn the ignition switch and Diagnostic Tester switch ON.
4.
All vehicles except Prius:
Select from the Diagnostic Tester menus: DIAGNOSIS, ENHANCED OBDII, VIN and VIN WRITE.
Prius vehicles:
Select from the Diagnostic Tester menus: DIAGNOSIS, OBD/MOBD, HV ECU, VIN and VIN WRITE.
5.
Write the VIN in accordance with the Diagnostic Tester display.