tC L4-2.4L (2AZ-FE) (2005)
/Page-57001.png)
Air Bag Control Module: Initial Inspection and Diagnostic Overview
AIRBAG SENSOR ASSEMBLY CENTER (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check (Refer to Air Bag Systems; Testing and Inspection).
AIRBAG SENSOR ASSEMBLY CENTER (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Perform a diagnostic system check (Refer to Air Bag Systems; Testing and Inspection).
AIRBAG SENSOR ASSEMBLY CENTER (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
a. Replace the airbag sensor assembly center.
CAUTION: For removal and installation procedures of the airbag sensor assembly center, see "Replacement", and be sure to follow the correct
procedure.
HINT: The airbag sensor assembly center should be replaced after any of the airbags has deployed, as it has been subjected to the impact.
