tC L4-2.4L (2AZ-FE) (2005)
e. Cover the horn button assembly with a cardboard box or tires.
1. Covering method using a cardboard box:
Cover the horn button assembly with the cardboard box and place the weights on the cardboard box in 4 places with at least 190 N (19 kg,
43 lb).
Cardboard box size: Must exceed the following dimension
X = 460 mm (18.11 in.)
Y = 650 mm (25.59 in.)
NOTE:
- When the dimension Y of the cardboard box exceeds the diameter of the disc wheel with tire which the horn button assembly is tied to,
X should be the following size.
X = 460 mm (18.11 in.) + width of tire
- If a cardboard box which is smaller than the specified size is used, the cardboard box will be broken by the shock from the airbag
deployment.
2. Covering method using tires:
Place at least 3 tires without disc wheels on the tire with disc wheel which the horn button assembly is tied to. Place the tire with disc wheel
on them.
Tire size: Must exceed the following dimensions
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)
CAUTION: Do not use tires with disc wheels except on the top and bottom.
NOTE:
- The tires may be marked by the airbag deployment, so use an extra tire.
- Do not place the SST connector under the tire because it could be damaged.