tC L4-2.4L (2AZ-FE) (2005)
d. Remove the generator rotor from the generator rectifier end frame.
e. Remove the washer from the generator rectifier end frame.
4. INSPECT GENERATOR BRUSH HOLDER ASSEMBLY
a. Check the brush length.
1. Using vernier calipers, measure the brush length.
Standard: 9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum: 4.5 mm (0.177 in.)
If the brush length is less than minimum, replace the generator brush holder.
5. INSPECT GENERATOR ROTOR ASSEMBLY
a. Check the resistance.