tC L4-2.4L (2AZ-FE) (2005)
4. Align the protrusions of the bearing retainer plate with the cutouts of the generator drive end frame, then install the bearing retainer plate
with the 4 screws.
Torque: 2.26 N.m (25 kgf.cm, 20 in.lbf)
7. INSTALL GENERATOR ROTOR ASSEMBLY
a. Place the generator drive end frame on the generator pulley.
b. Install the washer onto the generator rectifier end frame.
c. Install the generator rotor onto the generator rectifier end frame.
d. Using a 32 mm socket wrench and press, slowly push the generator drive end frame onto the generator rectifier end frame.