tC L4-2.4L (2AZ-FE) (2005)
/Page-808009.png)
d. Install the terminal insulator onto the generator rectifier end frame.
e. Install the generator rear end cover with the 3 nuts.
Torque: 4.6 N.m (45 kgf.cm, 41 in.lbf)
9. INSTALL GENERATOR PULLEY
SST 09820-63011 (09820-06010), 09820-06021
a. Install the generator pulley onto the generator rotor shaft, then temporarily tighten the generator pulley nut by hand.
