tC L4-2.4L (2AZ-FE) (2005)
Starter Motor: Service and Repair
Replacement
REPLACEMENT
NOTE: When disconnecting the battery terminal, initialize the following system after the terminal is reconnected.
-
Power window control system
-
Sliding roof system
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE STARTER ASSEMBLY
a. Disconnect the starter connector.
b. Open the terminal cap.
c. Remove the nut, then disconnect the starter
d. Remove the 2 bolts, then remove the starter.
3. INSTALL STARTER ASSEMBLY
a. Install the starter with the 2 bolts.
Torque: 37 N.m (380 kgf.cm, 27 ft.lbf)