tC L4-2.4L (2AZ-FE) (2005)
e. Fully push or pull the front axle hub in the direction of the required adjustment.
f.
Tighten the nuts.
Torque: 240 Nm (2,450 kgf-cm, 177 ft. lbs.)
g. Install the front wheel.
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
h. Check the camber.
If the measured value is not within the specified range, calculate the required adjustment amount using the formula. (Camber adjustment
amount) = Center of the specified range - Measured value
i.
Check installed bolts combination. Select appropriate bolts from the table to adjust the camber within the specified range.
Table (1) (Move the axle toward positive side)