tC L4-2.4L (2AZ-FE) (2005)
24. INSTALL VANE PUMP HOUSING OIL SEAL
a. Coat a new housing oil seal lip with power steering fluid.
b. Using SST and a press, install the housing oil seal.
SST 09950-60010 (09951-00280), 09950-70010 (09951-07100)
NOTICE: Make sure that the housing oil seal is installed in the correct direction as shown in the illustration.
25. INSTALL W/PULLEY SHAFT SUB-ASSEMBLY
a. Coat the bushing surface of the housing front with power steering fluid.
b. Gradually insert the w/ pulley shaft sub-assembly from the pulley side.
NOTICE: Do not damage the housing oil seal lip in the housing front.
26. INSTALL VANE PUMP SIDE PLATE FRONT
a. Coat a new O-ring with power steering fluid and install it into the housing front.
b. Coat a new O-ring with power steering fluid and install it onto the side plate front.