tC L4-2.4L (2AZ-FE) (2005)
/Page-911007.png)
b. Remove the bolt and the 3 nuts and separate the engine mounting insulator RR from the crossmember sub-assembly.
c. Using a transmission jack, support the crossmember sub-assembly.
d. Remove the 4 bolts and the crossmember bracket LH.
e. Remove the 4 bolts and the crossmember bracket RH.
f.
Remove the 2 nuts and the crossmember sub-assembly w/ power steering link assembly.
23. REMOVE STEERING COLUMN HOLE COVER SUB-ASSEMBLY NO.1
24. REMOVE STEERING INTERMEDIATE SHAFT
