tC L4-2.4L (2AZ-FE) (2005)
/Page-911010.png)
b. Using a wrench (22 mm) and a vise, hold the steering rack (RH side)
c. Using SST, remove the rack end sub-assembly (RH side) and claw washer from the steering rack.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
d. Using 2 SST, remove the rack end sub-assembly (LH side) and claw washer from the steering rack.
SST 09922-10010
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
37. REMOVE RACK GUIDE
a. Using a straight hexagon wrench (24 mm), remove the rack guide spring cap.
b. Remove the compression spring and the rack guide.
38. REMOVE POWER STEERING CONTROL VALVE
a. Remove the 2 bolts and the control valve housing with the control valve.
b. Remove the gasket.
