tC L4-2.4L (2AZ-FE) (2005)
c. Hold SST (09612-07220) and pull SST (09612-07210) to position SST (09612-07110) to the inside of the rack housing.
SST 09612-70100 (09612-07110, 09612-07210, 09612-07220)
HINT: Ensure that SST (09612-07110) is positioned at the chamfered part between the power steering cylinder tube oil seal and the rack
housing.
d. Install SST (09612-07240) to SST (09612-07230). Insert the tip of SST (09612-07230) into the service hole of SST (09612-07110) in the rack
housing.
SST 09612-70100 (09612-07110, 09612-07230, 09612-07240)
NOTICE:
-
Ensure that SST (09612-07240) is installed to prevent damage to SST (09612-07110).
-
Do not damage the inside of the rack horsing.
e. Install SST (09951-07150) to SST (09612-07230). Using a press, remove the power steering cylinder tube oil seal.
SST 09612-70100 (09612-07110, 09612-07230, 09612-07240), 09950-70010 (09951-07150)
NOTICE: Do not damage the rack housing.
HINT: Change SST (09951-07150) for another, from the set, with different length as needed.
43. INSPECT POWER STEERING RACK