tC L4-2.4L (2AZ-FE) (2005)
Steering Gear: Service and Repair
Part 2
45. INSTALL POWER STEERING RACK
a. Coat a new O-ring with power steering fluid and install it to the steering rack.
b. Expand the new oil seal with your fingers.
NOTICE: Be careful not to overly expand the oil seal.
c. Coat the oil seal with power steering fluid.
d. Install the oil seal to the steering rack, and adjust with your fingers.
e. Apply molybdenum disulfide lithium base grease to the rack teeth ends.
HINT: If necessary, scrape the burrs off the rack teeth ends and burnish.
f.
Affix SST to the steering rack.
SST 09631-20102
g. Coat SST with power steering fluid.
h. Install the steering rack to the rack housing.
i.
Remove SST.