tC L4-2.4L (2AZ-FE) (2005)
/Page-916005.png)
e. Remove the bolt and nut, and separate the rear side rear suspension arm assembly No.1 LH.
NOTICE: When removing the bolt, hold the nut not to rotate.
f.
Remove the 3 bolts and rear suspension arm assembly No.1 LH.
g. Remove the nut, rear suspension arm bracket assembly LH and rear suspension support stopper.
9. INSTALL REAR SUSPENSION ARM ASSEMBLY NO.1 LH
a. Install the rear suspension support stopper and rear suspension arm bracket assembly LH, and temporarily tighten the nut.
b. Install the rear side rear suspension arm assembly No.1 LH, and temporarily tighten the bolt and nut.
NOTICE: When installing the bolt, hold the nut not to rotate.
