tC L4-2.4L (2AZ-FE) (2005)
6. INSTALL REAR STABILIZER LINK ASSEMBLY LH
a. Install the rear stabilizer link assembly LH with the 2 nuts.
Torque: 44 Nm (449 kgf-cm, 32 ft. lbs.)
HINT: If the ball joint turns together with the nut, use a hexagon (5 mm) wrench to hold the stud.
7. INSTALL REAR STABILIZER LINK ASSEMBLY RH
HINT: Install the RH side by the same procedures as for the LH side.
8. INSPECT AND ADJUST REAR WHEEL ALIGNMENT