tC L4-2.4L (2AZ-FE) (2005)
/Page-939005.png)
HINT: Insert the bolt from the rear side of the vehicle and temporarily install the bolt.
17. TEMPORARILY TIGHTEN LOWER CONTROL ARM ASSEMBLY LH
a. Temporarily tighten the lower control arm assembly with the nut.
18. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.3
a. Install the parking brake cable assembly No.3 to the backing plate with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
19. APPLY HIGH TEMPERATURE GREASE
20. INSTALL PARKING BRAKE SHOE LEVER LH
21. INSTALL PARKING BRAKE SHOE ASSEMBLY LH NO.1
SST 09718-00010
22. INSTALL PARKING BRAKE SHOE ADJUSTING SCREW SET
23. INSTALL PARKING BRAKE SHOE STRUT LH
24. CHECK PARKING BRAKE INSTALLATION
25. INSPECT AXLE HUB BEARING LOOSENESS
26. INSPECT AXLE HUB BEARING RUNOUT
27. INSTALL REAR DISC
28. ADJUST PARKING BRAKE SHOE CLEARANCE
29. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH
a. Install the rear disc brake caliper with the 2 bolts.
Torque: 47 Nm (475 kgf-cm, 34 ft. lbs.)
