tC L4-2.4L (2AZ-FE) (2005)
8. REMOVE SHIFT LOCK RELEASE BUTTON COVER
a. Using a screwdriver, remove the shift lock release button cover from the position indicator housing sub-assembly.
HINT: Tape up the screwdriver tip before use.
9. DISCONNECT INDICATOR LAMP WIRE SUB-ASSEMBLY
a. Disconnect the indicator lamp wire connector from the floor shift assembly.
10. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY
a. Using a screwdriver, remove the floor shift position indicator housing sub-assembly from the shift lock control unit assembly.
HINT: Tape up the screwdriver tip before use.