tC L4-2.4L (2AZ-FE) (2005)
Clutch Slave Cylinder: Service and Repair
CLUTCH RELEASE CYLINDER ASSEMBLY (MTM)
OVERHAUL
1. DISCONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE
a. Using SST, disconnect the flexible hose tube.
SST 09023-00101
HINT: Use a container to catch the fluid.
2. REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY
a. Remove the 3 bolts and clutch release cylinder assembly.
3. REMOVE CLUTCH RELEASE CYLINDER KIT
a. Remove the boot from the cylinder body.
b. Remove the push rod from the cylinder body.
c. Remove the piston from the cylinder body.
NOTICE: Be careful not to damage the inside of the cylinder body.