tC L4-2.4L (2AZ-FE) (2005)
/Page-718009.png)
20. REMOVE FRONT AXLE OUTBOARD JOINT BOOT LH NO.2 CLAMP
a. One Touch Type:
1. Using a screwdriver, remove the outboard joint boot LH No.2 clamp, as shown in the illustration.
b. Omega Type:
1. Using pliers, remove the outboard joint boot LH No.2 clamp, as shown in the illustration.
21. REMOVE FRONT AXLE OUTBOARD JOINT BOOT LH CLAMP
a. One Touch Type:
1. Using a screwdriver, remove the outboard joint boot LH clamp, as shown in the illustration.
b. Omega Type:
1. Using pliers, remove the outboard joint boot LH clamp, as shown in the illustration.
22. REMOVE OUTBOARD JOINT BOOT
a. Remove the outboard joint boot from the outboard joint shaft assembly LH.
b. Remove the old grease from the outboard joint.
