tC L4-2.4L (2AZ-FE) (2005)
27. REMOVE DRIVE SHAFT BEARING CASE SUB ASSEMBLY (RH DRIVE SHAFT)
a. Using a press, remove the drive shaft bearing case.
NOTICE: Be careful not to drop the inboard joint assembly.
b. Remove the straight pin.
28. REMOVE FRONT DRIVE SHAFT DUST COVER (RH DRIVE SHAFT)
a. Using SST and a press, remove the drive shaft dust cover.
SST 09950-00020
NOTICE: Be careful not to drop the inboard joint assembly.
29. REMOVE FRONT DRIVE SHAFT BEARING (RH DRIVE SHAFT)
a. Using a snap ring expander, remove the drive shaft hole snap ring.
b. Using SST and a press, remove the drive shaft bearing.
SST 0952710011
c. Remove the snap ring.