tC L4-2.4L (2AZ-FE) (2005)
33. INSTALL FRONT DRIVE SHAFT DUST COVER (RH DRIVE SHAFT)
a. Using SST and a press, install a new drive shaft dust cover.
SST 09726-40010, 09527-10011
Distance (A): 0 to 1.0 mm (0 to 0.039 inch)
NOTICE: Be careful not to damage the dust cover.
b. Install the straight pin.
34. INSTALL FRONT DRIVE SHAFT DUST COVER RH
a. Using SST and a press, install a new drive shaft dust cover RH until the distance from the tip of the center drive shaft to the drive shaft dust
cover RH reaches the specification, as shown in the illustration.
SST 09527-10011
Distance (A): 91.0 to 92.0 mm (3.582 to 3.622 inch)
NOTICE:
-
Dust cover should be installed completely.
-
Be careful not to damage the dust cover.
35. INSTALL FRONT DRIVE SHAFT DUST COVER LH
a. Using SST and a press, install a new drive shaft dust cover LH.
SST 09527-10011
NOTICE:
-
Dust cover should be installed completely.
-
Be careful not to damage the dust cover.
36. INSTALL FRONT DRIVE SHAFT LH HOLE SNAP RING
a. Install a new hole snap ring.