tC L4-2.4L (2AZ-FE) (2005)
/Page-718017.png)
g. Using a snap ring expander, install a new shaft snap ring.
h. Aligning the matchmarks, install the inboard joint assembly LH to the outboard joint shaft assembly LH.
43. INSTALL FR AXLE INBOARD JOINT BOOT
a. Install the inboard joint boot to the inboard joint assembly LH and outboard joint shaft assembly LH.
44. INSTALL FRONT AXLE INBOARD JOINT BOOT LH NO.2 CLAMP
a. One Touch Type: Using a screwdriver, install the inboard joint boot LH No 2 clamp, as shown in the illustration.
NOTICE: Be careful not to damage the boot.
b. Claw Engagement Type: Using needle nose pliers, install the inboard joint boot LH No.2 clamp, as shown in the illustration.
NOTICE: Be careful not to damage the boot.
