tC L4-2.4L (2AZ-FE) (2005)
9. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY
a. Remove the 2 clips and separate the cable ends of the control cable assembly.
b. Release the cable locks of the shift cable and select cable using a screwdriver.
c. Turn the lock nuts 180 degrees counterclockwise, and hold them to remove the shift cable and select cable.
d. Remove the shift cable from the floor shift lever assembly while holding the lock nut.
e. Repeat the above process for the select cable.
NOTICE: Do not push in the cable locks.
10. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
a. Remove the 2 clips and 2 washers, and separate the top ends of the control cable assembly from the transaxle.
b. Remove the 2 clips, and separate the control cable assembly from the control cable bracket.