tC L4-2.4L (2AZ-FE) (2005)
HINT:
- Placing matchmarks is only necessary if the windshield glass being installed is new.
If it is reused windshield glass, matchmarks should already be present.
- When reusing the windshield glass, check and correct the matchmarks position.
NOTE: Check that the stoppers are attached to the vehicle body correctly.
4. Using a suction cup, remove the windshield glass.
b. Using a brush, apply Primer M to the exposed part of the vehicle body.
NOTE:
-
Allow the Primer M to dry for 3 minutes or more.
-
Do not apply Primer M to the adhesive.
-
Throw away any leftover Primer M.
-
Do not apply too much Primer M.
c. Using a brush or sponge, apply Primer G to the contact surface of the windshield glass.
HINT: If Primer G is applied to an area other than that which is specified, wipe off the primer with white gasoline before it dries.
NOTE:
-
Allow the Primer G to dry for 3 minutes or more.