tC L4-2.4L (2AZ-FE) (2005)
c. Remove the 3 bolts and wiper link assembly.
8. INSTALL WIPER LINK ASSEMBLY
a. Install the windshield wiper motor assembly with the 3 bolts.
Torque: 5.4 N.m (55 kgf.cm, 47 in.lbf)
b. Turn the crank arm of the windshield wiper motor by hand to the position shown in the illustration.
c. Apply DENSO No.50 grease to the crank arm pivot of the windshield wiper motor assembly.
d. Install the rod to the wiper link assembly.
9. INSTALL WINDSHIELD WIPER MOTOR & LINK ASSEMBLY
a. Install the windshield wiper motor & link assembly with the 4 bolts.
Torque: 5.4 N.m (55 kgf.cm, 47 in.lbf)