tC L4-25L (2AR-FE) Keyless Starting System - System Check Procedure
(2) Without depressing the brake pedal, press the "ENGINE START/STOP" switch and confirm the mode changes properly. From the "OFF"
mode:
^
Press once. The power supply mode is in the "ACC" mode.
^
Press twice. The power supply mode is in the "IG-ON" mode.
^
Press three times. The power supply mode is in the "OFF" mode.
NOTE
If the "ENGINE START STOP" switch illuminator blinks in amber, refer to the Repair Manual.
B. Check the engine start/stop function.
(1) Make sure that the gear selector lever is in the "P" position.
(2) When depressing the brake pedal, check that the green engine switch illuminator comes on, and push the "ENGINE START/STOP" switch to
start the engine.
(3) Push the switch again to stop the engine.
NOTE
When the "ENGINE START/STOP" switch is turned OFF with the gear selector lever in a position other than "P", the vehicle electrical
system will be in the "CC" mode. When the door is opened the Smart Key System Warning Buzzer will sound indicating that the electrical
system is not "OFF" when exiting the vehicle. This may result in a discharged battery. Be sure to turn OFF the engine AFTER shifting the
gear selector lever to the "P" position.
Checking Procedure:
^
Shift the gear selector lever to the "P" position (or check that the gear selector lever is in the "P" position).
^ Press the Engine Start/Stop switch once and check that the indicator light goes OFF.
5. Repeat steps 2 - 4 with each Smart Key.