xA L4-1.5L (1NZ-FE) (2006)
Antenna Amplifier: Service and Repair
AMPLIFIER ANTENNA
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE ROOF HEADLINING ASSEMBLY
a. Remove the headlining.
3. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY
4. REMOVE AMPLIFIER ANTENNA ASSEMBLY
a. Disconnect the connectors.
b. Detach the clamp.
c. Remove the nut and amplifier antenna.
INSTALLATION
1. INSTALL AMPLIFIER ANTENNA ASSEMBLY
a. Set the amplifier antenna to the hole on the roof, and place the antenna cord on the cutout of the antenna nut.
b. Install the amplifier antenna with the nut.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
c. Attach the clamp.