xA L4-1.5L (1NZ-FE) (2006)
/Page-1277002.png)
b. Adjust the cushion rubber so that the height of the hood and fender are aligned.
1. Raise or lower the hood's front end by turning the cushion rubber. Make sure that the clearance is within the standard range.
Standard clearance (B) : 0.0 +-1.5 mm (0.000 +-0.059 in.)
c. Adjust the hood lock.
1. Remove the grille.
2. Loosen the 3 hood lock bolts.
3. Adjust the hood lock position so that the striker can enter it smoothly.
4. Tighten the hood lock bolts after the adjustment.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
