xA L4-1.5L (1NZ-FE) (2006)
/Page-914004.png)
5) Repeat the 2 previous steps until all the air in the fluid is gone.
6) Tighten the bleeder plug.
Torque: 8.3 Nm (85 kgf-cm, 73 inch lbs.)
7) Install the cap.
8) Repeat the 7 previous steps to bleed air from the brake line for each wheel.
5. CHECK BRAKE FLUID LEVEL IN RESERVOIR
a) Check the fluid level. If necessary, add fluid.
Fluid: SAE J1703 or FMVSS No. 116 DOT3
