xA L4-1.5L (1NZ-FE) (2006)
c) Remove the 2 nuts, and pull out the brake master cylinder.
5. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
a) Pull out the brake master cylinder reservoir stopper.
b) Remove the brake master cylinder reservoir and 2 grommets from the brake master cylinder.
c) Remove the cap and strainer from the brake master cylinder reservoir.
INSTALLATION
1. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
a) Apply lithium soap base glycol grease to 2 new grommets and install them to the brake master cylinder.
b) Install the cap and strainer to the brake master cylinder reservoir.