xA L4-1.5L (1NZ-FE) (2006)
a. Remove the 4 screws and No. 2 cooler wiring.
b. Remove the screw and bracket.
c. Detach the clamp and disconnect the connector.
d. Remove the heater radiator unit.
REASSEMBLY
1. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
a. Install the heater radiator unit sub-assembly.
b. Attach the clamp to connect the connector.
c. Install the bracket with the screw.
d. Install the No. 2 cooler wiring with the 4 screws.