xA L4-1.5L (1NZ-FE) (2006)
i)
Using several steps, uniformly loosen and remove the 11 bearing cap bolts in the sequence shown in the illustration. Then remove the 5
bearing caps.
NOTICE: Loosen each bolt uniformly, keeping the camshaft level.
j) Remove the flange bolt with the No. 2 camshaft lifted up. Then detach the No. 2 camshaft and the camshaft timing sprocket.
k) Using several steps, uniformly loosen and remove the 8 bearing cap bolts in the sequence shown in the illustration. Then remove the 4 bearing
caps.
NOTICE: Loosen each bolt uniformly, keeping the camshaft level.
l)
Hold the timing chain by hand, and remove the camshaft and the camshaft timing gear assembly.
m) Tie the timing chain with a string as shown in the illustration.