xA L4-1.5L (1NZ-FE) (2006)
NO: Check the oil control valve operation.
Refer to the Technical Information System (TIS):
^
2005 model year Scion XA or Scion xB Repair Manual, Engine/Hybrid System - Engine Mechanical - "1NZ-FE: Engine: Inspection"
^
2006 model year Scion XA or Scion xB Repair Manual, Engine/Hybrid System - Engine Control - "1NZ-FE Engine Control System: SF1
System: P0010: Camshaft Position "A" Actuator Circuit (Bank 1)"
4.
Remove and replace the camshaft timing gear assembly. Refer to TIS:
^ 2005 model year Scion XA or Scion xB Repair Manual, Engine/Hybrid System - Engine Mechanical - "1NZ-FE: Camshaft: Replacement"
^ 2006 model year Scion XA or Scion xB Repair Manual, Engine/Hybrid System - Engine Mechanical - "1NZ-FE Engine Mechanical: Cylinder
Head: Replacement"
NOTE:
The timing gear MUST be in the unlocked position when installing on the camshaft.
Please see step 5 for instructions to unlock the camshaft timing gear.
5.
Identify whether the camshaft timing gear is unlocked or locked. (See Figure 2.)
^
If the camshaft timing gear is unlocked, it is ready to install.
^
If it is LOCKED, follow the steps below to unlock the camshaft timing gear before installing.