xA L4-1.5L (1NZ-FE) (2006)
2. REMOVE SHIFT LEVER KNOB (for Manual Transaxle)
3. REMOVE REAR CONSOLE BOX
4. REMOVE FRONT FLOOR PANEL BRACE
a) Remove the 2 bolts and floor panel brace.
5. REMOVE TAILPIPE
a) Remove the bolt and clamp.
b) Disconnect the 2 exhaust pipe supports, and remove the tailpipe and gasket.
6. REMOVE FRONT EXHAUST PIPE
a) Disconnect the 2 heated oxygen sensor connectors.
b) Remove the grommet.
c) Remove the 2 bolts and 2 compression springs.
d) Disconnect the 2 exhaust pipe supports, and remove the front exhaust pipe.