xA L4-1.5L (1NZ-FE) (2006)
/Page-1104001.png)
Air Door Actuator / Motor: Service and Repair
REMOVAL
1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
a. Remove the instrument panel.
2. REMOVE LOWER INSTRUMENT PANEL ASSEMBLY
a. Remove the instrument panel.
3. REMOVE DAMPER SERVO SUB-ASSEMBLY
a. Disconnect the connector.
b. Remove the 3 screws and damper servo.
INSTALLATION
1. INSTALL DAMPER SERVO SUB-ASSEMBLY
a. Install the damper servo with the 3 screws.
b. Connect the connector.
2. INSTALL LOWER INSTRUMENT PANEL ASSEMBLY
a. Install the instrument panel.
3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
a. Install the instrument panel.
