xA L4-1.5L (1NZ-FE) (2006)
Blower Motor Resistor: Service and Repair
REMOVAL
1.
REMOVE ECM COVER
2.
REMOVE ECM
3.
REMOVE BLOWER RESISTOR
a.
Disconnect the connector.
b.
Remove the 2 screws and blower resistor.
INSTALLATION
1.
INSTALL BLOWER RESISTOR
a.
Install the blower resistor with the 2 screws.
b.
Connect the connector.
2.
INSTALL ECM
3.
INSTALL ECM COVER