xA L4-1.5L (1NZ-FE) (2006)
6. REMOVE CENTER CLUSTER MODULE SWITCH
a. Remove the 2 screws.
b. Detach the 3 claws and remove the center cluster module switch.
INSTALLATION
1. INSTALL CENTER CLUSTER MODULE SWITCH
a. Attach the 3 claws to install the center cluster module switch.
b. Install the 2 screws.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER
a. Connect the connectors.
b. Attach the 4 clips and claw to install the instrument cluster finish panel.
c. Install the 4 screws.
3. INSTALL HEATER CONTROL KNOB
a. Install the 3 heater control knobs.
4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION