xA L4-1.5L (1NZ-FE) (2006)
b. Install the clip.
8. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
9. INSTALL AIR CONDITIONING BLOWER ASSEMBLY
10. INSTALL ECM
11. INSTALL LOWER INSTRUMENT PANEL ASSEMBLY
a. Install the instrument panel.
12. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
a. Install the instrument panel.
13. CONNECT HEATER WATER OUTLET HOSE
a. Using pliers, grip the claw of the clip and slide the clip to connect the heater water hose.
14. CONNECT HEATER WATER INLET HOSE
HINT: Use the same procedures described for outlet hose.
15. CONNECT LIQUID TUBE SUB-ASSEMBLY
16. CONNECT SUCTION HOSE SUB-ASSEMBLY
17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
18. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
19. CHECK SRS WARNING LIGHT
a. Check the SRS warning light.
20. ADD ENGINE COOLANT
21. CHARGE REFRIGERANT
22. WARM UP ENGINE
23. CHECK FOR ENGINE COOLANT LEAKS
24. CHECK FOR LEAKAGE OF REFRIGERANT