xA L4-1.5L (1NZ-FE) (2006)
/Page-1386015.png)
A description of the main areas of each circuit inspection is as given.
Basic Inspection
BASIC INSPECTION
a. WHEN MEASURING RESISTANCE OF ELECTRONIC PARTS
1. Unless otherwise stated, all resistance measurements should be made at an ambient temperature of 20 degrees C (68 degrees F). Resistance
measurements may be inaccurate if measured at high temperatures, i.e. immediately after the vehicle has been running. Measurements should
be made after the engine has cooled down.
b. HANDLING CONNECTORS
