xA L4-1.5L (1NZ-FE) (2006)
/Page-1415001.png)
Marker Lamp: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. REMOVE FRONT SIDE MARKER LIGHT BULB
a. Remove the light socket.
b. Remove the light bulb from the light socket.
REASSEMBLY
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. INSTALL FRONT SIDE MARKER LIGHT BULB
a. Install the light bulb to the light socket.
b. Install the light socket.
