xA L4-1.5L (1NZ-FE) (2006)
Tail Lamp: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. REMOVE REAR NO. 1 COMBINATION LIGHT BULB
a. Remove the light socket.
b. Remove the light bulb from the light socket.
2. REMOVE REAR NO. 2 COMBINATION LIGHT BULB
a. Remove the light socket.
b. Remove the light bulb from the light socket.
3. REMOVE REAR NO. 3 COMBINATION LIGHT BULB
a. Remove the light socket.
b. Remove the light bulb from the light socket.
REASSEMBLY
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. INSTALL REAR NO. 3 COMBINATION LIGHT BULB
a. Install the light bulb to the light socket.
b. Install the light socket.
2. INSTALL REAR NO. 2 COMBINATION LIGHT BULB
a. Install the light bulb to the light socket.
b. Install the light socket.
3. INSTALL REAR NO. 1 COMBINATION LIGHT BULB
a. Install the light bulb to the light socket.
b. Install the light socket.