xA L4-1.5L (1NZ-FE) (2006)
Alignment: Service and Repair
Front Wheel Alignment
FRONT WHEEL ALIGNMENT
INSPECTION
1. INSPECT TIRE
a. Inspect the tire.
2. INSPECT VEHICLE HEIGHT
Standard vehicle height
Standard vehicle height
Measuring points:
A: Ground clearance of front wheel center
B: Ground clearance of lower suspension arm front bolt center
C: Ground clearance of axle beam set bolt center
D: Ground clearance of rear wheel center
NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
HINT: Bounce the vehicle at the corners up and down to stabilize the suspension and inspect the vehicle height.
3. INSPECT TOE-IN